Floor Protection - A Product Guide
Your floors want special protection when undergoing remodeling, throughout new building, moving heavy furniture or equipment, and for other occasions beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price 1000's of dollars in replacement and repair costs. This article describes surface protection products for floors to be able to make informed decisions on the best product to use in your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These embrace frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).
(2) Products by the sheet: These embody corrugated plastic, masonite, and different rigid protection. Protective supplies bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and normally come as 4 ft by 8 feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces however doesn't work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often go away adhesive residue when removed. Frequent paper protection products include:
· Ramboard™ A coated compressed paper board 38 mils thick that's breathable, waterproof and made from recycled paper.
· Kraft paper is a lightweight brown paper that is inexpensive however does not afford any impact protection and may easily tear
· Scrim paper may incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to reinforce the paper and stop tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they are also too thin to supply much impact protection.
· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The large drawback of using Rosin paper is that it may cause a everlasting stain if the paper gets wet. Rosin paper also can rip simply so it not normally recommended to be used
· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nevertheless it just isn't coated with a water-resistant finish and should be kept dry always so that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors which are curing. Two of the great benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films don't provide any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and don't use recycled materials making them a poor selection in maintainable protection. Protection films are available in a variety of adhesion "tack". Hard surface protection films can have a lower tack and shade than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with a lot of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Both plywood and Masonite are sold in the usual measurement of 4 toes by eight feet and are more costly per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on a variety of floor types and provide adequate protection in opposition to heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nevertheless they're bulky to hold and store. These wood sheets must be used on prime of a softer protection comparable to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don't supply moisture protection and can be harder to chop to dimension than different protection types.
Here's more info about correx look into the page.
Роль форума: Участник
Тем начато: 0
Ответов написано: 0